Unit Converter
Convert between 61 units across length, weight, temperature, digital data (MB/GB/TB), speed, time, volume, and area. Includes a tip calculator with bill splitting and percentage presets.
Built and maintained by Muhammad Tayyab — Founder, DevPik.
Why Use Unit Converter?
Every developer has Googled "14 inches in cm" and landed on a page buried in pop-ups. This converter runs in the browser with no network round-trip and covers the units developers actually hit: bytes↔MB for file sizes, ms↔seconds and minutes for timeouts, bits↔bytes for bandwidth. It also handles the units you only deal with once a year: acres to square meters when a designer sends a site plan, knots to km/h when scanning flight data, or megabits to megabytes when checking ISP claims. Precise SI factors and up-to-12-digit output mean you can trust the result for engineering work.
How to Use Unit Converter
- Select the conversion category from the tabs at the top: Length, Weight, Temperature, Data, Speed, Time, Volume, Area, or Tip Calculator.
- Choose the 'From' and 'To' units using the dropdown menus, then enter the value you want to convert.
- The result appears instantly. Use the swap button to reverse the conversion direction, or copy the result to your clipboard.
- Data units use the binary convention (1 KB = 1,024 bytes), the way Windows reports file sizes. Drive makers and ISPs count in 1,000s, so their figures differ by about 2.4% at KB, 4.9% at MB and 7.4% at GB.
- For temperature, remember the converter handles values, not deltas — a 10 °C change in temperature is not the same as a 10 °F change.
Worked Examples
A timeout in milliseconds, in minutes
Time: 90,000 ms → min
1.5 min
Config files often take milliseconds while docs and dashboards talk in minutes.
A Content-Length header in megabytes
Data: 5,242,880 B → MB
5 MB
Data units here are binary: 1 MB = 1,048,576 bytes, the way Windows reports file sizes.
Inch-to-cm for a UI spec
Length: 14 in → cm
35.56 cm
Handy when collaborating with designers using mixed unit systems.
About Unit Converter
The Unit Converter is a comprehensive, all-in-one tool that handles conversions across 8 categories with 61 units. Convert between metric and imperial measurements for length (millimeters to miles), weight (grams to pounds), temperature (Celsius, Fahrenheit, Kelvin), digital data (bytes to terabytes, bits to megabits), speed (km/h to mph to knots), time (milliseconds to years), volume (milliliters to gallons, teaspoons to liters), and area (square meters to acres). The tool also includes a full-featured Tip Calculator with bill splitting, percentage presets, and per-person calculations. Every conversion uses precise mathematical formulas with smart number formatting that switches between decimal and scientific notation based on the magnitude of the result. All calculations happen instantly in your browser — no server, no delays, no rounding errors.
Troubleshooting & Common Issues
Data conversion looks wrong — I expected 1 GB to be 1000 MB
The converter uses the binary convention for every data unit: 1 GB here is 1,024 MB, or 1,073,741,824 bytes (strictly a gibibyte, GiB). Drive makers use the decimal convention, 1 GB = 1,000,000,000 bytes, which is why a "500 GB" drive shows as about 465 GB in your OS. There is no decimal mode, so for a decimal figure convert to bytes and divide by 1,000 per step.
Temperature delta converts incorrectly
Temperature scales have different zero points, so a temperature *value* (°C → °F) is not the same conversion as a temperature *change* (Δ°C → Δ°F). This tool converts values. For deltas, drop the zero-point offset and multiply by the scale factor (Δ°F = Δ°C × 1.8).
Result shows scientific notation when I want a decimal
Very large or very small results default to scientific notation to stay readable (e.g., 1.5e-9 instead of 0.0000000015). Copy the number out and paste it elsewhere — the underlying value is exact. Or switch units to something closer in magnitude (nanoseconds instead of seconds).
Imperial fluid ounce vs. US fluid ounce differs by a few mL
UK and US fluid ounces are not identical: 1 US fl oz ≈ 29.57 mL, 1 UK fl oz ≈ 28.41 mL. The converter has the US fluid ounce only. For a British recipe, convert by hand (1 UK fl oz = 28.41 mL) and enter the result in mL. Gallons are covered both ways: there are US Gallon and Imperial Gallon units.
Frequently Asked Questions
How accurate are the conversions?
The converter uses official SI conversion factors with full floating-point precision (up to 12 significant digits). Results are formatted with smart precision to avoid unnecessary trailing zeros while keeping accuracy.
Does the temperature converter handle negative values?
Yes. Temperature conversion correctly handles negative values for all three scales (Celsius, Fahrenheit, Kelvin). For example, -40 °C correctly converts to -40 °F — the point where both scales intersect.
What data units are supported?
Byte, Kilobyte, Megabyte, Gigabyte, Terabyte and Petabyte, plus Bit, Kilobit and Megabit. All of them use the binary convention (1 KB = 1,024 bytes, 1 Mb = 1,048,576 bits). There is no decimal (1,000-based) mode, and no per-second rate units: convert 100 Mb to MB to read a 100 Mbps plan as megabytes per second.
How does the tip calculator work?
Enter your bill amount, select a tip percentage (or use presets for 10%, 15%, 18%, 20%, 25%), and optionally split between multiple people. The calculator shows the tip amount, total, per-person cost, and per-person tip.
Are my conversions stored or sent to a server?
No. All conversions run client-side in your browser using the SI factors built into the tool. Inputs and results never leave your device — useful when checking dimensions for confidential designs or measurements from a private dataset.
Why does my data conversion show different values in different tools?
Two conventions exist: binary (1 KiB = 1024 bytes, used by operating systems) and decimal (1 KB = 1000 bytes, used by hard drive manufacturers and ISPs). The gap is 2.4% at kilobytes and compounds to about 7.4% at gigabytes, which is why a 500 GB drive shows as about 465 GB in your OS. This converter uses the binary convention for every data unit.
Is this tool really free, with no sign-up?
Yes. The full converter — every category, every unit, the tip calculator — is free with no sign-up, no API key, and no usage limits. Like the rest of DevPik, the page may show ads; the converter itself has no paywall.
Guides & Further Reading
nanochat: Train Your Own GPT-2 Grade ChatGPT in About Two Hours
nanochat trains a ChatGPT-style model from scratch, tokenizer to chat, on a single 8XH100 node. The GPT-2 speedrun record is 1.65 hours, about 1,000 times cheaper than GPT-2 cost in 2019. Here is how it works, what a run really costs, and how to try it.
8 min readHow to Make a Game Playable in the Browser: WebAssembly, WebGPU and the Headers That Break It
A practical guide to getting an existing game running in a browser tab: compiling with Emscripten, choosing WebGL 2 or WebGPU, the cross-origin isolation headers threaded builds need, shipping hundreds of megabytes, and the input, audio and licensing rules that trip up first ports.
12 min readContext Mode: The Open-Source MCP Server That Cuts Claude Code Context Usage by 98%
Every tool call your AI coding agent makes dumps raw data into its context window. A Playwright snapshot costs 56 KB, twenty GitHub issues cost 59 KB, and after 30 minutes 40% of your context is gone. Context Mode is an open-source MCP server that fixes this from four sides at once: it sandboxes tool output (98% less context), persists session memory across compaction, makes the agent think in code instead of reading files, and enforces it all with hooks across 17 platforms. It hit #1 on Hacker News and has 30,000+ stars.
10 min readMarkup vs Margin — What's the Difference and How to Calculate Both
Markup and margin are the two most confused metrics in business. This guide explains the difference with formulas, conversion tables, real examples, and common mistakes to avoid.
11 min readRelated Tools
Pixels to Inches Converter
Convert pixels to inches, centimeters, millimeters, and points at any DPI. Includes inches to pixels conversion and a precomputed reference table.
Px to Rem Converter Online
Convert pixels to rem (and back) with a configurable root font size, copy-ready Tailwind class output, and a quick reference table of the most common front-end sizes.
Color Code Converter
Convert colors between HEX, RGB, HSL, and CMYK with a visual picker and HSL sliders. Every format updates in real-time — ideal for design-to-dev handoffs, Tailwind themes, and print.
Markup Calculator
Calculate markup percentage, profit margin, selling price, and profit — and convert between markup and margin instantly. Includes a reference table for common percentages and formulas explained.
Scientific Notation Converter
Convert numbers to and from scientific notation, E notation, and engineering notation. Includes a scientific notation calculator with step-by-step solutions.
Aspect Ratio Calculator
Calculate aspect ratios from dimensions, derive missing dimensions from a ratio + one side, and resize images proportionally. Includes 7 common-ratio presets, decimal output, and the modern CSS aspect-ratio property value.
Was this tool helpful?